240mm 4 Core Steel Wire Armoured SWA Cable Application

240mm 4 Core Steel Wire Armoured SWA Cable made up of a black PVC sheath, XLPE insulation, copper conductors and steel wire armouring. This type of cable is designed for mains electricity in various applications, including laying underground, power networks, incoming mains to homes amongst a host of other uses externally and internally.

240mm 4 Core Steel Wire Armoured SWA Cable is suitable and often used for direct burial, with the steel wire armouring providing further protection from external damaged. The XLPE insulation is resistant to a number of different fluids, chemicals and has good heat stability, as well as being UV Resistant.

240mm 4 Core Steel Wire Armoured SWA Cable Standard

BS 5467, IEC/EN 60502-1, IEC/EN 60228 , Flame Retardant according to IEC/EN 60332-1-2c

CONSTRUCTION :

240mm 4 Core Steel Wire Armoured SWA Cable Construction

swa armoured cable 4 core

Conductors: Plain circular, compacted or shaped stranded copper or aluminium conductor (Conductor shaped: RE=circular solid, CC=compacted circular stranded, SM=sector shaped stranded)

Insulation: XLPE (cross-linked polyethylene) rated at 90°C

Color identification

1 Core : Red or Black, 2 Cores : Red, Black, 3 Cores: Red, Yellow, Blue , 4 Cores: Red, Yellow, Blue, Black, 5 Cores: Red, Yellow, Blue, Black, Green

Above 5 Cores: Black Cores with White numerals

*The above identifying can be changed as user requirement

Assembly /Inner Sheath：Two, Three or Four insulated conductors are laid-up together with non-hygroscopic fillers and the assembly is bedded with an extruded layer of PVC. In case of non-armoured cables, this layer may be omitted

Armour： Galvanized Steel Wires, single core cables shall be Aluminium wire armour, Aluminum/Steel Tapes applied helically over the bedding of multi-core cables as per IEC 60502.

Sheath：Extruded PVC Type ST2 as per IEC 60502-1 or Type 9 as BS 6346/5467.

Special type of PVC sheathing material such as Fire Retardant PVC, Anti-Termite PVC, Anti-Rodent PVC, Sunlight resistant PVC, Oil Resistant PVC are available on special request. Also, special sheathing materials such as LLDPE, MDPE, HDPE, LSZH, and CPE are available on request.

Fire Performance of Cable Sheaths

Cables can be supplied with special flame retardant PVC outer sheath to comply With the flame test requirements of IEC 60332-3-22, IEC 60332-3-23 and IEC 60332-3-24, we can also supply cables with Low Smoke Halogen Free (LSHF) material according to IEC 60502-1, BS 7211, BS 6724 or other equivalent standards.

TECHNICAL DATA :

240mm 4 Core Steel Wire Armoured SWA Cable Technical Data

Voltage: 600/1000v

Operating temperature: Maximum 90°C, minimum bending 0°C

Maximum short-circuit temperature: 250°C(max. 5s)

Minimum bending raduis: x20 cable diameter (armoured)

PARAMETER :

240mm 4 Core Steel Wire Armoured SWA Cable Parameter

Type	Specification	Outer diameter	Nominal thickness of insulation	Diameter of steel wire	Nominal sheath thickness	Approx. Outer diameter of cable	Approx. Weight of cable		Ampacity of cable
							Approx. Weight of cable		Air		Soil
							CU	AL	Cu	Al	Cu	Al
XLPE/SWA	mm2	mm	mm	mm	mm	mm	kg/km	kg/km	A	A	A	A
	4×4 RE	2.24	0.7	1.25	1.8	19.1	770	670	37	28	46	35
	4×6 RE	2.76	0.7	1.25	1.8	20.3	916	772	47	37	56	46
	4×10 CC	3.8	0.7	1.6	1.8	22.3	1148	895	64	47	76	56
	4×16 CC	4.8	0.7	1.6	1.8	24.5	1472	1070	84	64	98	76
	4×25 CC	6.0	0.9	1.6	1.8	27.5	1942	1317	115	84	126	98
	4×35 CC	7.0	0.9	1.6	1.8	29.5	2386	1521	141	115	152	126
	4×50 SM	8.0	1.0	2.0	1.9	32.9	3209	2036	172	141	181	152
	4×70 SM	9.5	1.1	2.0	2.1	36.7	4197	2502	218	172	222	181
	4×95 SM	11.0	1.1	2.0	2.3	40.5	5362	3016	269	218	267	222
	4×120 SM	12.4	1.2	2.5	2.4	45.3	6908	3940	313	269	305	267
	4×150 SM	13.8	1.4	2.5	2.6	50.0	8327	4683	359	313	344	305
	4×185 SM	15.4	1.6	2.5	2.7	54.2	10044	5466	405	359	383	344
	4×240 SM	17.5	1.7	2.5	2.9	60.4	12672	6666	451	405	442	383
	4×300 SM	19.6	1.8	2.5	3.1	65.7	15302	7795	497	451	461	422

Note: RE=circular solid, CC=compacted circular stranded, SM=sector shaped stranded