Send message

SEND

RESET

+86 371 60975619

manager@hdcable.com.cn

+8613290961076

Your position:

Home > Products > Bare Stranded Conductors > Aluminium Conductor Steel Reinforced ACSR

ACSR Squirrel Conductor 20mm2

Aluminum Conductor Steel Reinforced ACSR Squirrel Conductor 20mm2

Code name: Squirrel

Corss section area: 20mm2

Standard: BS 215 Part 2

Conductor Material: Aluminum and Steel

Email: manager@hdcable.com.cn

Send message Whatsapp

Share with:

OVERVIEW FEATURES CONSTRUCTION PARAMETER

ACSR Squirrel Conductor 20mm2 Application:

ACSR – The full name: Aluminum Conductor Steel Reinforced. Aluminum Conductor Steel Reinforced is used as bare overhead transmission cable and as primary and secondary distribution cable. ACSR offers optimal strength for line design. Variable steel core stranding enables desired strength to be achieved without sacrificing ampacity.

FEATURES :

ACSR Squirrel Conductor 20mm2 Features:

With simple structure, the aluminum conductor steel reinforced is easy to set up and maintain, with low cost and high transmission capacity. It is advantageous for this ACSR to be put up across a valley or river or under other various special geographic conditions. The ACSR has advantages of sound electrical conductivity, high mechanical strength, high tensile strength, etc, and the pole distance can be lengthened. It is used for power transmission lines with various voltage levels and plays an important role in the electricity transmission field.

CONSTRUCTION :

ACSR Squirrel Conductor 20mm2 Construction:

ACSR Squirrel conductor strands 6 aluminums and 1 steel. But their diameter is the same, and they are 2.11mm. We can know the overall diameter is 6.33 mm. From the standard, we can know the nominal aluminum area of acsr squirrel conductor is 20 mm2. When you want to buy acsr weasel conductor, you should pay attention to this point. It isn’t suitable for the standard, and it is reasonable. The aluminum part cross section is 20.94mm2 and steel part corss section area is 3.49mm2. So total sectional area for ACSR suireel concutor is 24.43mm2. After the cabling, the total linear mass is 85 kg/km.
Through the test, the calculated breaking load should be 7880 daN. At the 20℃, calculate D.C. resistance should be 0.1.368Ω/km.

PARAMETER :

ACSR Squirrel Conductor 20mm2 Parameter

Code name		acsr squirrel conductor
Nominal aluminum area mm 2		20
Stranding structure	Al. No.	6
	Al. Dia.	2.11
	St. No.	1
	St. Dia	2.11
Sectional area of aluminum	mm 2	20.94
Total sectional area	mm 2	24.43
Overall diameter	mm	6.33
Total Weight	kg/km	85
Calculated breaking load	daN	788
Calculate D.C resistance at 20 ℃	Ω/km	1.368

Send message

SEND

RESET