Send message

SEND

RESET

+86 371 60975619

manager@hdcable.com.cn

+8613290961076

Your position:

Home > Products > Bare Stranded Conductors > AAAC Conductors

All Aluminum Alloy Conductors GB/T 1179-1999

All Aluminum Alloy Conductors

Shape of conductor: Stranded aluminium

Sectional area: 16 - 900mm2

Insulation: N/A

Standard: GB/T 1179-1999

Email: manager@hdcable.com.cn

Send message Whatsapp

Share with:

OVERVIEW Standards Parameter

All Aluminum Alloy Conductors

Construction:

Standard 6201, 6101 aluminum alloy conductors, are concentric-lay- stranded, similar in construction and appearance to 1350 grade aluminum conductors. They were developed to fill the need for an economical conductor for overhead applications requiring higher strength than that obtainable with 1350 grade aluminum conductors, but without a steel core. The DC resistance at 20°C of the 6201,6101 conductors and of the standard ACSR of the same diameter are approximately the same. Conductors of the 6201,6101 alloys are harder and, therefore, have a greater resistance to abrasion than conductors of 1350-H19 grade aluminum.

Application:

The AAAC is used for overhead power transmission lines , especially the electric power augmentation of old transmission lines. We specialized in the research and application of AAAC for almost ten years. When replacing the aluminium conductor steel reinforced , the AAAC can save 5-8% of the construction cost. This AAAC covers aluminium alloy (hard solution, heat-treated, cold worked, and artifically aged) round wires for electrical purposes to be used as component wires of aluminium alloy conductor and aluminium alloy conductor steel reinforced.

Standards :

Standards:

We can supply this conductor according to different recognized standards,
such as IEC61089, BS215,ASTM B231, CSA C49, DIN480201, JIS C3109, customers'
special specification also can be satisfied.

Properties：

AAAC has a good corrosion resistance due to being composed out of aluminum alloy wires only, minimum conductivity of 52% IACS,high breaking strength per weight and normal creep values. AAAC has the highest strength per weight among all bare overhead conductors.

Parameter :

Code Number	Stranding Wire Diameter		Approx	Sectional Area			Approx Weight	Breaking Load	DC Resistance
	Stranding Wire Diameter		Overall	Sectional Area
	Al	Steel	Diameter	Al	Steel	Total
	mm	mm	mm	mm 2	mm 2	mm 2	Kg/km	KN	Ohm/km
16	6/1.84	1/1.84	5.53	16	2.67	18.7	64.6	6.08	1.7934
25	6/2.30	1/2.30	6.91	25	4.17	29.2	100.9	9.13	1.1478
100	6/4.61	1/4.61	13.8	100	16.7	117	403.8	34.33	0.2869
125	18/2.97	1/2.97	14.9	125	6.94	132	397.9	29.17	0.2304
160	18/3.36	1/3.36	16.8	160	8.89	169	509.3	36.18	0.18
250	22/3.80	7/2.11	21.6	250	24.6	275	880.6	68.72	0.1154
400	54/3.07	7/3.07	27.6	400	51.9	452	1510.3	123.04	0.0723
450	54/3.26	7/3.26	29.3	450	58.3	508	1699.1	138.42	0.0643
500	54/3.43	7/3.43	30.9	500	64.8	565	1887.9	153.8	0.0578
560	54/3.63	19/2.18	32.7	560	70.9	631	2103.4	172.59	0.0516
630	54/3.85	19/2.31	34.7	630	79.8	710	2366.3	191.77	0.0459
710	54/4.09	19/2.45	36.8	710	89.9	800	2666.8	216.12	0.0407
800	72/3.76	7/2.51	37.6	800	34.6	835	2480.2	167.41	0.0361
900	72/3.99	7/2.66	39.9	900	39.9	939	2790.2	188.33	0.0321

Send message

SEND

RESET