Send message

SEND

RESET

+86 371 60975619

manager@hdcable.com.cn

+8613290961076

Your position:

Home > Products > Concentric Service Cable > Aluminum Concentric Service Cable

8000 Series Aluminum Alloy Concentric Cable 2X16mm2 IEC Standard

Type of cable: 8000 Series Aluminum Alloy Concentric Cable

Phase Conductor: Aluminum Alloy

Insulation : XLPE

Neutral Conductor: Aluminum Alloy

Sheath: PVC (XLPE/PE) sheath

Email: manager@hdcable.com.cn

Send message Whatsapp

Share with:

OVERVIEW STANDARD CONSTRUCTION PARAMETER

8000 Series Aluminum Alloy Concentric Cable Application

The 8000 series aluminum alloy concentric cable is used in electric service entrance from the power distribution network to the meter pannel(especially where it is required to prevent electricity theft), and as feeder cable from the meter pannel to the distribution pannel.

This cable an be used in dry and wet places, outdoors or directly buried.It has a maximum operating temperature of 90ºC and rated voltage of 600V&below.

Concentric cable refers to a cable with two concentric conductors, and the conductor and the shield layer share the same axis. It is usually used in distribution networks, current surface boards, meters or circuit panels, which can be placed directly underground or outdoors , Even suitable for dry and humid environments, can support high-bandwidth communications on relatively long lines without repeaters.

STANDARD :

8000 Series Aluminum Alloy Concentric Cable Standard

IEC60502-1, BS7870, ASTMD2655
ASTMB556, ASTMB193, ASTMB8, UL44, UL1581, UL854

CONSTRUCTION :

aluminum alloy concentric cable
1.Phase conductor: Aluminum alloy conductor 8000 series
2.Insulation :XLPE
3.Neutral conductor :Aluminum alloy conductor 8000 series
4.Binder tape :Non-hygroscopic tape
5.Sheathed:PVC (XLPE/PE) sheath

PARAMETER :

8000 Series Aluminum Alloy Concentric Cable IEC Standard

Core and Nominal Cross Section	Conductor		Insulation Thickness	Concentric Conductor			Thickness of Cable Shield	Overall Diameter	Weight of Cable	Max DC Resistance of Conductor (20℃)
mm2	Number	Diameter mm	mm	Number	Diameter mm		mm	mm	kg/km	Ω/km (Phase)	Ω/km (Concentric)
Copper conductor (IEC standard)
2X10	7	1.35	1.55	20		0.85	1.40	11.80	290	1.83	1.90
2X16	7	1.70	1.55	32		0.85	1.40	12.84	420	1.15	1.20
2X25	7	2.14	1.60	29		1.13	1.50	15.02	630	0.727	0.76
2X35	19	1.53	1.65	27		1.35	1.60	17.00	832	0.524	0.55
Aluminum alloy conductor (IEC standard)
2X10	7	1.35	1.55	23		1.13	1.40	12.41	192	3.08	1.335
2X16	7	1.70	1.55	26		1.13	1.40	13.46	230	1.91	1.808
2X25	7	2.14	1.6	29		1.13	1.50	15.08	290	1.20	1.0586
2X35	19	1.53	1.65	27		1.35	1.60	17.05	370	0.868	0.7966

Send message

SEND

RESET